Filter
Top Products
3-29
Inputs Menu
2. Select the type of category to be assigned (Misc, Keyframe
Effects, etc.) by pressing the appropriate soft button.
3. Turn the FUNCTION SELECT knob to assign a specific function
(Aux Tally, etc.).
4. After the desired function has been selected for each GPI,
press program gpi to enter the selection, which is indicated in
the display table.
The following categories are available for assignment:
MISC — Enables selection of the Aux Tally Back function, or
allows the selected GPI input to be disabled.
AUX TALLY — Allows an external device to control the aux bus
tally level (high or low). The AUX BUS soft knob selects the
appropriate aux bus.
DISABLE GPI — Causes any signal applied to the selected GPI
input to be ignored.
kf effect — Enables selection of the Keyframe GPI function.
The following transitions may be triggered with GPI pulses:
■ run, rewind, auto run, and reverse
AUTO TRANS
— Enables selection of the Auto Transition GPI
function. The following transitions may be triggered with GPI
pulses:
■ M/E 1, M/E 2, and M/e 2 PST BLK
CUT
— Enables selection of the Cut GPI function. The following
cuts may be triggered by the GPI:
■ M/E 1, and M/E 2
E-MEM
— Enables selection of the E-MEM GPI function. The
following E-MEM functions may be triggered by the GPI:
■ RECALL ME 1, RECALL ME 2, RECALL MSTR, AUTO
RECALL, EFX DISSOLV
, and SEQUENCE. The REGISTER
soft knob selects the register for E-MEM recalls.
FRAME STORE — Enables selection of the Frame Store GPI
function. Triggerable functions are as follows:
■ VIDEO GRAB, KEY GRAB, and MASK GRAB
Press exit twice to return to the Configuration Menu.