Filter
Top Products
3-64
Section 3 — Menu Descriptions
Selections in the Key 1 NAM menu are as follows:
M/E SELECT — Selects the M/E to be set.
NAM K2 INTO K1 — Enables or disables NAMing Key 2 into Key 1.
When NAMing Key 2 into Key 1, Key 2 will be on the M/E output
but not indicated by a key ON indicator. (The crosspoint button
tally will be correct.)
Restore Defaults — Restores default conditions to selected M/E.
NAM SOFTNESS — Adjusts the video signal transition area
between two video signals for the selected M/E.
NAM OFFSET — Set the transition level in the case where two or
more video signals are present, the signal with the largest
instantaneous amplitude is passed.
Press exit to return to the Keyer menu.
KEY 1 NAM MENU
keyer / key 1 nam
M/E
SELECT
NAM K2
INTO K1
NAM SOFTNESS
= 0%
NAM OFFSET
= 50%
RESTORE
DEFAULTS
M/E 2 KEY 1 OFF
M/E 1 KEY 1 ON
M/E 1
OFF
M/E 2
ON