Filter
Top Products
3-25
Inputs Menu
4. If mapping a chroma key input, use the chroma key input
soft
knob to assign the chroma key type for the currently selected
crosspoint button.
5. Use the video/key fmt button to assign whether the input will
use the shaped video or unshaped video format.
6. Refer to “DPM Map Aux Bus menu” under “DPM Setup,” in
this section, for use of the log channel function of the log/phy
assignment
button.
7. After mapping the input, you may name the crosspoint by
pressing name xpt button>. The Name Xpt Button menu
appears as shown next.
8. Repeat steps 1 through 7 for all inputs.
Press the EXIT button to return to the Inputs menu.