Filter
Top Products
2-94
Section 2— Control Panel Descriptions
Frame Store Looping Mode (Figure 2-20) takes the output of an
M/E Keyer, sends it to the Frame Store module, then returns the
output of the Frame Store to the Mix/Wipe circuit of the same
M/E in the switcher. See Figure 2-20. This provides the effect of
inserting the Frame Store right into the M/E, between the Keyer
and the Mix/Wipe system.
1. To select Frame Store looping mode, first press the Aux Bus
button on the main menu panel, then press the BUS SELECT
soft button in the Aux Bus Menu to select the Aux Bus to be
looped (AUX 2 for the Model 2200).
2. With the EFF LOOP MODE button, select FRAMESTORE. This
sends the output of the selected Keyer to the Frame Store
option module and connects the output of the Frame Store to
the Mix/Wipe system of the same M/E.
3. On the Switcher’s
Pvw Aux bus, select the Keyer output to be
sent to the Frame Store by pressing Aux 2 Effects Send Only
button on the Model 2200.
NOTE:
The Keyer
A
selections apply only when in layered mode.
M/E
KEYER
M/E
MIXER
Key 2
A Bkgd
B Bkgd
Key 2
Key 1
M/E Out
Aux Bus 4 (Model 4000)
or Aux Bus 2 (Model 2200)
0844-01
Effects Return Input
SWITCHER
A Bkgd
B Bkgd
Key
1
FRAME STORE
Figure 2-20. Effects Send Frame Store Looping Mode