Filter
Top Products
3-85
E-MEM Menu
For LOCK REG:
LOCK ALL, UNLOCK ALL — Locks or unlocks all 100 registers
for all currently enabled “levels.” (Levels are enabled with the
Enable buttons on the E-MEM panel - for a definition of levels,
refer to Enable Buttons, Effects Memory Subpanel, this
section.) If any registers are unlocked, a LOCK ALL selection is
displayed; if any or all registers are locked, an UNLOCK ALL
selection is displayed.
LOCK BANK, UNLOCK BANK — Locks or unlocks all registers
in the currently displayed bank and register for all currently
enabled levels. Note that the current bank displayed may not
be the same as the current bank for independent E-MEM
levels. If that is the case, the current bank will not get locked
on those levels, but the selected bank will.
If any currently enabled E-MEM level has an unlocked
register in the bank, a LOCK BANK instruction is displayed for
the currently displayed bank number. When all registers in
the bank are locked, an UNLOCK BANK instruction is
displayed.
LOCK REG, UNLOCK REG — Locks the register whose number
is displayed in the menu for all currently enabled levels. Note
that this may not be the current register for some levels. If that
is the case, the current register will not get locked on those
levels, but the selected register will.
If any currently enabled E-MEM register level is unlocked, a
LOCK REG instruction is displayed for the currently displayed
register number. When all of the enabled E-MEM register
levels are locked, an UNLOCK REG instruction is displayed.