Filter
Top Products
3-52
Section 3 — Menu Descriptions
The LOGICAL column indicates the logical aux bus being
used. This may be different from the physical aux bus when
the Model 2200 is connected to a Kaleidoscope or other DPM
that is able to control the aux buses. (This column is
informational only. You can not change it from this menu.)
NOTE:
Since the process of unshaping the video signal results in
dividing the video signal by its key, level errors, especially around black,
may produce extreme signal levels where the key is at or near zero.
Kaleidoscope ignores these extraneous signals, but they may cause
problems with external sync separators or clamps. Therefore, it is
recommended that connections to Kaleidoscope inputs be made directly
from the 2200 Aux Bus outputs.
When the Effects Send option is not present, the VIDEO/KEY FMT
selections are not visible in the menu.
This is the end of the Configuration menu and the end of the
switcher setup. The following menus are used by the operators to
operate the switcher.