Filter
Top Products
3-61
Keyer Menu
Keyer Copy Menu
From the Keyer menu, press keyer copy> to select the Keyer Copy
menu. This menu is used to copy keyer parameters from any
keyer to another.
FROM GROUP and FROM KEYER — Select the Keyer whose setup
parameters are to be copied.
WIPES — Allows you to include or exclude Wipe settings that
may be associated with the selected keyers.
TO GROUP and TO KEYER — Select the destination Keyer that is to
receive the copied keyer setup.
DO KEYER SWAP — Initiates the keyer Swap currently selected.
DO KEYER COPY — Initiates the keyer Copy currently selected.
NOTE:
An UNDO function appears in the menu after a Copy or Swap
operation has been initiated. The Undo must be performed before exiting
the menu in order to take effect.
NOTE:
If the destination Keyer has different parameters than the source
Keyer, those parameters are set to default values in the destination Keyer.
Press exit to return to the Keyer menu.
KEYER COPY MENU
keyer / keyer copy
FROM
KEYER
FROM
GROUP
TO
GROUP
DO KEYER
SWAP
KEY 1
KEY A
KEY B
COPY M/E 1 KEY 2
M/E 2 KEY 2TO
SWAP M/E 1 KEY 2 M/E 2 KEY 2WITH
KEY 1
KEY A
KEY B
M/E 2
M/E 1
DO KEYER
COPY
TO
KEYER
M/E 1
M/E 2
KEY 2
KEY 2
WIPES
EXCLUDE
INCLUDE