Filter
Top Products
3-37
External Interface Menu
DPM Map Aux Buses Menu
From the DPM Setup menu, press DPM MAP AUX BUSES> to
access the DPM Map Aux Buses menu:
The Aux bus-to-device assignment for each DPM device is shown
in the table in the display.
1. Select the desired device by pressing the DEVICE SELECT
button
2. For Kaleidoscope, rotate the NUMBER OF CHANNELS knob,
assigning aux buses 1 through n to this device number. Note
that a Kaleidoscope device (or other poolable DPM) does not
allow you to select a starting aux bus number other than aux
bus 1, and that all aux buses assigned to this Kaleidoscope
must be in consecutive order.
DPM MAP AUX BUSES MENU
DEVICE
SELECT
DPM 2
CHAN 1
AUX 1
-
-
CHAN 2
AUX 2
-
-
DPM 1
DPM 3
DPM 4
NUMBER OF CHANNELS
= 2
CHANNEL 1
= AUX 6
CHAN 4
-
-
-
CHAN 6
-
-
-
CHAN 7
-
-
-
CHAN 8
-
-
-
CHAN 5
-
-
-
CHAN 3
AUX 3
-
-
config/extern if/dpm setup/dpm map aux buses
DPM 2 AUX 6 AUX 7 - - - ---
AUX 4
Connection of physical AUX buses
to physical channels
AUX 5MISC - - - -
-AUX 8