Filter
Top Products
2-9
Auto Delegation
*In an M/E Matte Subpanel: Pressing the PRI WIPE WASH button causes the Wipe Subpanel to be
auto delegated to the primary wipe pattern generator for the calling M/E. Pressing the SEC WIPE
WASH
button in the M/E Matte Subpanel causes the Wipe Subpanel to be auto delegated to the
secondary wipe pattern generator for the calling M/E.
Keyer PRI PST PTTN or SEC
PST PTTN
Wipe
Keyer CHR KEY Chroma Keyer
Keyer INHibit MASK or
FORCE MASK
Mask INHibit MASK or
FORCE MASK button
must be turned on by the
press
Keyer Any Borderline mode
button except NORMal
Matte (same M/E) Lights K1 BORD or K2
BORD indicator in matte
subpanel, depending on
Keyer delegation
Keyer MATTE FILL Matte (same M/E) Lights K1 FILL or K2
FILL indicator on Matte
subpanel, depending on
keyer delegation
Matte PRI WIPE WASH or
SEC WIPE WASH
Wipe Matte
* If Wipe BORDER is on
E-MEM Register Recall Keyer and Key Bus
Mask PRI WIPE or SEC
WIPE
Wipe
Wipe BORDER Matte (same M/E) BORDer button must be
turned on by the press
Lights PRI WIPE or SEC
WIPE indicator on matte
subpanel
Table 2-1. Panel Delegation - (continued)
Subanel Button Pressed Delegated Subpanel
Conditions and
Comments