Filter
Top Products
3-18
Section 3 — Menu Descriptions
System Parameters
From the Configuration menu, press the System parameters>
button to bring up the System Parameters menu.
1. ASPECT RATIO — Soft button may be set to either the 4 x 3 or
16
x 9 setting, depending on your installation requirements.
2. FIELD DOMINANCE — (FIELD DOMINANCE set to NONE),
selection changes become effective at the beginning of the
next field (immediately after the functions have been
changed).
Using Field Dominance
If the Model 2200 output is going to be recorded onto tape that will
later be edited along with other tape, it is important that changes
take place consistently on the same field. They can occur on either
Field 1 or Field 2 of the frame, but need to be on the same field
every time. If this is not done, there will be a “flash” at the edit in
the resulting taped video.
SYSTEM PARAMETERS MENU
BOTH
config/system param
ASPECT
RATIO
MATTE
GEN LIM
SET
CLOCK >
16 X 9
VALID RGB
NONE
4 X 3
XMITABLE
FIELD 2
FIELD
DOMINANCE
NONE
FIELD 1