Filter
Top Products
2-44
Section 2— Control Panel Descriptions
LeaRN, EFFect DIS, <TRAN RATE, (eff dissolve rate>, (register)
The command syntax is defined below.
LEARN and EFFECT DIS may be pressed in either order to start
the command sequence.
TRAN RATE enables a user-defined effects dissolve rate to be
introduced in the dissolve.
<EFF DISSOLVE RATE> is a 1- to 3-digit number entered on the
keypad that specifies the effects dissolve rate in number of TV
frames. (If the number entered is a 1- or 2-digit number, the
entry must be terminated by pressing ENTER).
REGISTER is any desired register number, as described
previously (that is, BANK, BANK NUMBER, REGISTER NUMBER).
The effects dissolve rate is the same as the auto transition rate
indicated in the readout on the corresponding Transition
Subpanel.
When the register with the learned effects dissolve is recalled, the
EFFect DIS button will high tally until the dissolve is completed,
then will turn off.
During a recall of a register with multiple levels, the EFF DIS
button will high tally if any of the enabled levels contains an
effects dissolve. However, not all enabled levels may be
dissolving.
Different effects dissolve rates may be learned separately into
different enabled levels. The effects dissolve rates on different
levels are completely independent, and thus the dissolves may be
running at different rates on different levels.