Filter
Top Products
3-46
Section 3 — Menu Descriptions
Peripheral Triggers Menu
From the Peripheral Interface menu, press
PERIPHERAL
TRIGGERS>
to open the Peripheral Triggers menu.
Use this menu to configure eight peripheral triggers for the
switcher (designated A through H). Each trigger specifies what is
to be done and is sent to a particular address (Device Number) on
the Peripheral Bus. This menu also allows delegation of the trigger
to the E-MEM level of misc or DPM 1 - DPM 4.
Once configured, these triggers can be learned into E-MEM effects
(on the MISc or dpm 1 - dpm 4 level) or fired directly from this
menu (FIRE n. Refer to the Attach Peripheral Trigger Menu
description in this manual for attaching peripheral triggers to
E-MEM registers.
1. Increment TRIGGER SELECT to select the designator to be
assigned (A through H).
2. Turn the DEVICE NUMBER soft knob to select the peripheral
device to which that trigger will be sent.
PERIPHERAL TRIGGERS MENU
config/extern if/peripheral if/peripheral triggers
FIRE
B
<>LEVEL
= DPM 1
DEVICE NUMBER
= 1
B
TRIGGER
SELECT
FUNCTION NUMBER
= 4
A
B
C
D
E
F
G
H
1
1
1
15
-
0
17
3
DEVICE NO.
1
15
4
0
1
-
2
1
FUNCTN NO.
-
-
DPM 1
0
-
-
-
-
LEVEL