Filter
Top Products
3-23
Inputs Menu
Inputs Menu
From the Configuration menu, press the
INPUTS > button to access
the Inputs menu:
1. Press MAP INPUTS to select the format (shaped or unshaped)
for each video/key input.
From the map inputs menu, press name xpt button to name
each crosspoint (up to nine letters may be used).
2. Press CHR KEY INPUTS to define format and setup for the two
optional Chroma Key analog inputs. (Menu will depend on
setting of FIELD RATE switch on the Sync Generator Module
in Cell A10 of the switcher frame).
3. Press GPI INPUTS to program up to eight GPI inputs to trigger
Model 2200 functions, such as E-MEM registers.
4. Use the top and bottom soft knobs to select the test pattern
signal for the top and bottom of the screen.
Press exit to return to the Configuration menu.
INPUTS MENU
config / inputs
ANLG KEY
INPUTS >
ANLG VIDEO
INPUTS >
ANLG INPUT
ANLG INPUT
TIMING >
TIMING >
MAP
INPUTS >
CHR KEY
INPUTS >
TOP
TEST SIGNAL
GPI
INPUTS >
100% COLOR BARS
75% COLOR BARS
MULTIPULSE
PULSE & BAR
CHR KEY TEST
H RAMP
WALKING BITS
100% COLOR BARS
75% COLOR BARS
HORIZ TIMING
MULTIPULSE
PULSE & BAR
CHR KEY TEST
H RAMP
WALKING BITS
BOTTOM
TEST SIGNAL
HORIZ TIMING