Polycom (RMX) 1500 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 924
If the correct conference password is entered, the participant is prompted to enter the chairperson
identifier key.
If no identifier is entered, the participant is connected to the conference as a standard participant.
If the chairperson identifier is entered, the participant is prompted to enter the chairperson password.
When the participant enters the chairperson password or his/her personal password, it is sent to the
external database application for validation.
If the password is incorrect the participant is disconnected from the MCU.
If there is a match, the participant is granted the right to join the conference as chairperson. In
addition, the external database application sends to the MCU the following parameters:
Participant name (display name)
Participant Information, such as the participant E-mail. These fields correspond to Info 1, 2, 3 and
4 fields in the Participant Properties - Information dialog box.
To enable conference access validation for all participants the following conferencing components are
required:
The external database must hold the Chairperson Password or the participant’s Alias.
The Conference IVR Service assigned to the conference (defined in the Profile) must be configured
to check the external database for the Chairperson password only when the participant enters the
chairperson identifier key (either pound or star). In addition, it must be configured to prompt for the
chairperson identifier key and password.
System Settings for Ad Hoc Conferencing and External
Database Authentication
Ad Hoc Settings
Before a participant can initiate an Ad Hoc conference (with or without authentication), the following
components must be defined:
Profiles
Defines the conference parameters for the conferences that will be initiated from the Ad Hoc-enabled
Entry Queue. For more details, see Conference Profiles on page 7.
Entry Queue IVR Service with Conference ID Request Enabled
The Entry Queue Service is used to route participants to their destination conferences, or create a
new conference with this ID. For details, see IVR Services .
In Ad Hoc conferencing, the Conference ID is used to check whether the destination conference is
already running on the MCU and if not, to start a new conference using this ID.
Ad Hoc - enabled Entry Queue
Ad Hoc conferencing must be enabled in the Entry Queue and a Profile must be assigned to the Entry
Queue. In addition, an Entry Queue IVR Service supporting conference ID request. For details, see
Entry Queues on page 7..