Polycom (RMX) 1500 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 476
Signaling Host IP
Address
On RealPresence Collaboration Server 1800 this field is disabled as only one IP
address is used for signaling and media transmission.
Enter the address to be used by IP endpoints when dialing in to the MCU.
Dial out calls from the Collaboration Server are initiated from this address.
This address is used to register the Collaboration Server with a Gatekeeper or a
SIP Proxy server.
Media Card 1 IP Address Collaboration Server 1500/1800: Enter the IP address of the media card to be
used by IP endpoints when dialing in to the MCU.
Collaboration Server 200/4000: Enter the IP address of the first media card as
provided by the network administrator.first media card
Endpoints connect to conferences and transmit call media (video, voice and
content) via these addresses.
Media Card 2 IP Address
(Collaboration Server
2000/4000)
Collaboration Server 2000/4000: Enter the IP address of the second media
card if installed.
Endpoints connect to conferences and transmit call media (video, voice and
content) via these address.
Media Card 3 IP Address
(Collaboration Server
4000)
Collaboration Server 4000: Enter the IP address of the third media cards if
installed.
Endpoints connect to conferences and transmit call media (video, voice and
content) via these addresses.
Media Card 4 IP Address
(Collaboration Server
4000)
Collaboration Server 4000: Enter the IP address of the fourth media cards if
installed.
Endpoints connect to conferences and transmit call media (video, voice and
content) via these addresses.
Subnet Mask Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Default IP Network Service – IP
Field Description