Polycom (RMX) 1500 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 774
FORCE_AUDIO_CODEC_FOR_
MS_SINGLE_CORE
This flag is used to force the use of a specific Audio algorithm when a
Microsoft Office Communicator R2 or Lync Client is hosted on a
workstation with a single core processor. The flag value overrides the
default audio algorithm selection (G.722.1) that may cause audio
quality problems when G.722.1 is used by Microsoft Clients running on
single processor workstations.
This flag can be set to:
•AUTO – No forcing occurs and the Collaboration Server negotiates
a full set of Audio algorithm during capabilities exchange.
G711A/U or G722 – Set this flag value according to the hosting
workstation capabilities. If the Collaboration Server detects single
core host during capabilities exchange it will assign a G.711 or G.722
Audio algorithm according to the flag value.
Possible values: AUTO, G711A, G711U, G722
Default: G711A
FORCE_ENCRYPTION_FOR_U
NDEFINED_PARTICIPANT_IN_W
HEN_AVAILABLE_MODE
When set to YES, Undefined participants must connect encrypted,
otherwise they are disconnected.
When set to NO (default) and the conference Encryption in the Profile
is set to “Encrypt When Possible”, both Encrypted and Non-encrypted
Undefined participants can connect to the same conferences, where
encryption is the preferred setting.
Default: NO
FORCE_G711A Setting this flag forces the use of the G711A Audio Codec.
Possible values: YES / NO
Default: NO
FORCE_RESOLUTION Use this flag to specify IP (H.323 and SIP) endpoint types that cannot
receive wide screen resolution and that were not automatically
identified as such by the Collaboration Server.
Possible values are endpoint types, each type followed by a semicolon.
For example, when disabling Wide screen resolution in an HDX
endpoint enter the following string: HDX;
Note: Use this flag when the flag SEND_WIDE_RES_TO_IP is set to
YES.
FORCE_STATIC_MB_ENCODIN
G
This flag supports Tandberg MXP mode of sending and receiving video
by IP endpoint in HD 720p resolution and Video Quality set to Motion.
This mode is not supported for ISDN endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
G728_IP Enables or disables declaration of G.728 Audio Algorithm capabilities in
IP calls.
Range: YES / NO
Default: NO
Manually Added, Modified, Deleted System Flags
Flag Description