Polycom (RMX) 1500 Security Camera User Manual


  Open as PDF
of 1183
 
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 289
3 Define the following parameters:
Entry Queue Definitions Parameters
Option Description
Display Name The Display Name is the conferencing entity name in native language character
sets to be displayed in the Collaboration Server Web Client.
In conferences, Meeting Rooms, Entry Queues and SIP factories the system
automatically generates an ASCII name for the Display Name field that can be
modified using Unicode encoding.
English text uses ASCII encoding and can contain the most characters
(length varies according to the field).
European and Latin text length is approximately half the length of the
maximum.
Asian text length is approximately one third of the length of the maximum.
The maximum length of text fields also varies according to the mixture of
character sets (Unicode and ASCII).
Maximum field length in ASCII is 80 characters. If the same name is already
used by another conference, Meeting Room or Entry Queue, the Collaboration
Server displays an error message requesting you to enter a different name.
Routing Name Enter a name using ASCII text only. If no Routing Name is entered, the system
automatically assigns a new name as follows:
If an all ASCII text is entered in Display Name, it is used also as the Routing
Name.
If any combination of Unicode and ASCII text (or full Unicode text) is entered
in Display Name, the ID (such as Conference ID) is used as the Routing
Name.
Profile Select the Profile to be used by the Entry Queue.
The default Profile is selected by default. This Profile determines the Bit Rate
and the video properties with which participants connect to the Entry Queue and
destination conference.
To connect to a Video Switching conference via Entry Queue, the Profile
assigned to the Entry Queue must be set to Video Switching. It is recommended
to use the same profile for both the destination conference and Entry Queue.
In Ad Hoc conferencing, it is used to define the new conference properties.
ID Enter a unique number identifying this conferencing entity for dial in. Default
string length is 4 digits.
If you do not manually assign the ID, the MCU assigns one after the completion
of the definition. The ID String Length is defined by the flag
NUMERIC_CONF_ID_LEN in the System Configuration.