Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 531
Collaboration Server Configuration
Once the network cables are connected to the Collaboration Server, you can modify the default IP Network
Service and add additional Network Services.
System Flags and License Settings
The MULTIPLE_SERVICES System Flag determines whether the Multiple Services option will be activated
once the appropriate license is installed. Possible Values: YES / NO Default: NO
This flag must be manually added to the system configuration and set to YES to enable this option. For more
information see Manually Adding and Deleting System Flags.
IP Network Service Definition
Use this procedure to define Network Services in addition to the Network Service already defined during
first entry installation and configuration. Each of the defined Network Service can be associated with one or
more media cards installed in the system (depending on the system type).
Once a media card is associated with a Network Service it cannot be associated with another network
service.
To add new/additional Network Services:
1 In the Device Management pane, click IP Network Services ().
2 In the Network Services list toolbar, click the Add Network Service button.
The New IP Service - Networking IP dialog box opens.
3 Define the following fields:
If the MULTIPLE_SERVICES System Flag is set to YES and no RTM ISDN or RTM LAN card is
installed in the RealPresence Collaboration Server (RMX) 2000, an Active Alarm is displayed.
IP Network Service - IP Parameters
Field Description
Network Service Name Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and can contain
character sets that use Unicode encoding.
IP Network Type Select the IP Network environment. You can select:
• H.323 - For an H.323-only Network Service.
•SIP - For a SIP-only Network Service.
• H.323 & SIP - For an integrated IP Service. Both H.323 and SIP participants
can connect to the Collaboration Server using this service.
Note: This field is displayed in all Default IP Service tabs.