Filter
Top Products
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc. 255
● Create the Master and Slave conferences, defining the appropriate line rate.
● Create a cascade-enabled Dial-out Participant link in the Master conference
● Create a cascade-enabled Dial-in Participant link in the Slave conference.
Creating a Cascade Enabled Dial-out/Dial-in Participant Link
The connection between two cascaded conferences is established by a cascade enabled dial-out and dial-in
participants, acting as a cascades link.
The dialing direction determines whether the dial-out participant is defined in the conference running on the
Master MCU or the Slave MCU. For example, if the dialing direction is from the Master conference on level
1 to the Slave conference on level 2, the dial-out participant is defined in the Master conference on level 1
and a dial-in participant is defined in the Slave conference running on the MCU on level 2.
If the cascade-enabled dial-out participant always connects to the same destination conference on the other
(second) MCU, the participant properties can be saved in the Address Book of the MCU for future repeated
use of the cascaded link.
To define the dial-out cascade participant link:
1 In the Conferences pane, select the conference.
2 In the Participants pane, click New Participant ().
The New Participant - General dialog box is displayed.
3 Define the following parameters: