Filter
Top Products
8-37
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 8 Managing Users and Identity Stores
Managing External Identity Stores
Step 2 Choose Configuration > Endpoint Profiles > View/Edit Profiles List.
A list of profiles in a table appears.
Step 3 Click on the name of a profile to edit it.
Step 4 In the Save Profile page, ensure that the LDAP option is enabled by clicking the Yes radio button next
to it, if it is not already done as shown in Figure 8-2.
Figure 8-2 Configuring Endpoint Profiles in NAC Profiler
Step 5
Click Save Profile.
Configuring NAC Profile LDAP Definition in ACS for Use in Identity Policy
After you install ACS, there is a predefined LDAP database definition for NAC Profiler. This predefined
database definition for NAC Profiler contains all the required data for establishing an initial connection.
The only exception is the host information, which depends on your specific deployment configuration.
The steps below describe how to configure the host information, verify the connection, and use the
profile database in policies.
Note Make sure that ACS NAC Profiler is chosen under Access Policies > Access Services > Default
Network Access > Identity.
Note The NAC Profiler template in ACS, available under the LDAP external identity store, works with Cisco
NAC Profiler version 2.1.8 and later.