Filter
Top Products
CHAPTER
18-1
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
18
Managing System Administration Configurations
After you install Cisco Secure ACS, you must configure and administer it to manage your network
efficiently. The ACS web interface allows you to easily configure ACS to perform various operations.
For a list of post-installation configuration tasks to get started with ACS, see Chapter 6,
“Post-Installation Configuration Tasks”.
When you select System Administration > Configuration you can access pages that allow you do the
following:
• Configure global system options, including settings for TACACS+, EAP-TTLS, PEAP, and
EAP-FAST. See Configuring Global System Options, page 18-1.
• Configure protocol dictionaries. See Managing Dictionaries, page 18-5.
• Manage local sever certificates. See Configuring Local Server Certificates, page 18-14.
• Manage log configurations. See Configuring Logs, page 18-21.
• Manage licensing. See Licensing Overview, page 18-34.
Configuring Global System Options
From the System Administration > Configuration > Global System Options pages, you can view
these options:
• Configuring TACACS+ Settings, page 18-1
• Configuring EAP-TLS Settings, page 18-2
• Configuring PEAP Settings, page 18-3
• Configuring EAP-FAST Settings
• Generating EAP-FAST PAC
Configuring TACACS+ Settings
Use the TACACS+ Settings page to configure TACACS+ runtime characteristics.
Select System Administration > Configuration > Global System Options > TACACS+ Settings.
The TACACS+ Settings page appears as described in Table 18-1: