Filter
Top Products
Chapter 9. Starting and Ending the Print Format Utility
This chapter provides additional information for starting and ending the Print Format
Utility.
|
Starting the Print Format Utility
You can start the Print Format Utility by typing either of the following commands on
the AS/400 command line and pressing Enter.
1. STRAFPU (Start IBM Advanced Function Printing Utilities for AS/400)
2. STRPFU (Start Print Format Utility)
If you start by typing STRAFPU, the following menu appears:
AFPU IBM Advanced Function Printing Utilities for AS/4
Select one of the following:
Overlay Utility
1. Work with source overlays
2. Work with source overlay files
Print Format Utility
11. Work with PFD definitions
12. Work with PFD definition files
13. Print database file member
| 14. Print AFP Utilities tutorial
Resource Management Utility
21. Convert to page segment
22. Work with overlays
23. Work with page segments
Selection or command
===>
F3=Exit F4=Prompt F9=Retrieve F12=Cancel F16=System main menu
(C) COPYRIGHT IBM CORP. 1991, 1993.
You can start the following four Print Format Utility functions from this menu:
Option Function
11 Work with PFD definitions
12 Work with PFD definition files
13 Print database file member
14 Print AFP Utilities tutorial
The following describe the options available on the above menu. To select one of
the following, type the number of the option on the command line, and press Enter.
Copyright IBM Corp. 1996, 1998 135