Filter
Top Products
Field Name Description
Measurement
method
Specifies the measurement method to be used for the offset.
Possible values are:
1 Row/Column is used as the measurement method.
2 Either inch or centimeter is used as the measurement
method depending on the value specified for the unit of
measure.
Note: To change both the measurement method and its following
| fields, change the value for the measurement method and press
| the Enter key before you change the following fields.
The following fields specify the offset of the page layout.
Across Specifies the value of the horizontal distance from the left edge of the
logical page to the origin of the element to be created. The valid values
are:
0 to 999 (columns)
0 to 22.75 (inches)
0 to 57.79 (centimeters)
Down Specifies the value of the vertical distance from the top edge of the
logical page to the origin of the element to be created. The valid values
are:
0 to 999 (rows)
0 to 22.75 (inches)
0 to 57.79 (centimeters)
Grid The grid is the combination of lines at regular intervals, and is defined
by the measurement method, the across (horizontal interval), and the
down (vertical interval).
Measurement
method
Specifies the measurement method being used for the grid.
Possible values are:
1 Row/Column is used as the measurement method.
2 Either inch or centimeter is used as the measurement
method depending on the value specified for the unit of
measure.
Note: To change both the measurement method and its following
| fields, change the value for the measurement method and press
| the Enter key before changing the following fields.
You can specify to print horizontal and vertical lines with the printout to
help your designing work. The following fields specify the horizontal
and vertical distances between grid lines.
Across Specifies the value of the horizontal distance from the left edge of the
logical page to the origin of the element to be created. The valid values
are:
1 - 999 (columns)
0.10 - 22.75 (inches)
0.10 - 57.79 (centimeters)
Down Specifies the value of the vertical distance from the top edge of the
logical page to the origin of the element to be created. The valid values
are:
1 - 999 (rows)
0.10 - 22.75 (inches)
0.10 - 57.79 (centimeters)
Chapter 10. Work with PFD Definitions 149