Filter
Top Products
Note: When AFP Utilities for AS/400 finds an order which is not on this table, AFP
Utilities for AS/400 regards the file as an incorrect GDF file and exits from
graphics handling.
Figure 59 (Page 2 of 2).
Order GDF
generated
by S/390
GDDM
GDF
generated
by
AS/400
GDDM
Support by AFP
Utilities for
AS/400
72-Segment Attribute Supported Supported Ignored
2
73-Segment Attribute Modify Supported - Ignored
2
74-Push and Set Character Angle Supported - Ignored
2
75-Push and Set Character Shear Supported - Ignored
2
76-Push and Set Character-Box Spacing Supported - Ignored
2
77-Push and Set Marker Box Supported - Ignored
2
78-Push and Set Character Set Supported - Ignored
2
79-Push and Set Character Mode Supported - Ignored
2
7A-Push and Set Character Direction Supported - Ignored
2
81-Line at Current Position Supported Supported Supported
82-Marker at Current Position Supported - Supported
83-Character String at Current Position Supported Supported Supported
85-Fillet at Current Position Supported - Supported
86-Arc at Current Position Supported Supported Ignored
2
87-Full Arc at Current Position Supported - Ignored
2
91-Begin Image Data at Current Position Supported Supported Ignored
2
92-Image Data Supported Supported Supported
93-End Image Supported Supported Supported
A1-Relative line at current position Supported - Supported
C1-Line Supported Supported Supported
C2-Marker Supported - Supported
C3-Character String Supported - Supported
C5-Fillet Supported - Supported
C6-Arc Supported - Ignored
2
C7-Full Arc Supported - Ignored
2
D1-Begin Image Supported - Ignored
2
E1-Relative Line Supported - Supported
Note:
1. The order is supported and it is the short format, which has no length field.
2. AFP Utilities for AS/400 finds this order, AFP Utilities for AS/400 skips this order and
handles the next order.
Appendix D. Using GDFs in AFP Utilities 443