Filter
Top Products
Sense Bytes
0, 1, 19
Description and Possible Causes Recovery
0300..01 Unallocated or unsupported graphics
command code:
You specified both of the following for the
text although your printer supports only
black.
A value other than *DEFAULT and
8=Black for the
Color
prompt.
A value other than *DEFAULT for the
Character size
prompt.
Specify *DEFAULT for the
Color
prompt.
0300..0E Unsupported attribute value
An attribute value for a graphics order of
your GDF is not supported by your printer.
Specify *CONTENT for print
fidelity or use the standard
default value for the
attribute.
03C3..00 Character symbol set not available:
You specified the vertical format of the
text with Character size value other than
*DEFAULT though its font is font type 1
(specified with a font and character
identifier)
Specify the horizontal format
or use a font of font type 2
(specified with a coded font)
or font type 3 (specified with
a code page and a font
character set).
0403..00 Unsupported bar code type:
You specified a bar code type that is not
supported by the printer.
Change the bar code type or
the printer.
0405..00 Unsupported bar code color:
You specified a value other than
*DEFAULT or 8=Black for the
Color
prompt of the bar code although your
printer supports only black color.
Specify *DEFAULT for the
Color
prompt.
0406..00 Unsupported unit/module width:
You specified a module width value of a
bar code that is not supported by the
printer.
Change the module width or
the printer.
0821..00 Undefined character:
One or more characters in the text have a
code point that is not defined.
An attempt to print a record in the
database file member with one or
more characters whose code points
are not defined is made.
A record in the database file member
contains characters not supported by
the bar code type specified for a bar
code.
The font specified to print text is not
correct. For example, a DBCS font is
specified for SBCS text.
Use correct data and correct
font.
08C1..00 Position check:
Overlay size is too large.
Reduce the overlay size.
406 AFP Utilities for AS/400 User’s Guide