Filter
Top Products
1=Create PFD Definition File
Before you create a PFD definition, you must create a PFD definition file. To
create a PFD definition file, do the following on the Work with PFD Definition Files
display on page 197.
1. Type 1 in the
Opt
column in the first line of the list.
2. Type the name of the new PFD definition file in the
File
prompt in the first line
of the list.
3. Type the name of the library where the PFD definition file resides in the
Library
prompt in the first line of the list.
4. Press Enter.
The following display appears:
Create PFD Definition File
File . . . . . . . . . . . . : PFD2
Library . . . . . . . . . : PFULIB
Type choices, press Enter.
User specified DBCS data . . N Y=Yes, N=No
Text 'description' . . . . . File for product label
Authority . . . . . . . . . ᑍLIBCRTAUT Name, ᑍLIBCRTAUT, ᑍALL
ᑍCHANGE, ᑍEXCLUDE, ᑍUSE
F3=Exit F5=Refresh F12=Cancel
Using the Create PFD Definition File display, you can create a PFD definition file
from the information specified on this display.
The Work with PFD Definitions display appears after the PFD definition file is
created, so that you can create PFD definitions in the PFD definition file.
Field Name Description
File Shows the name of the PFD definition file you are going to create.
Library Shows the name of the library in which the PFD definition file is
created.
User specified
DBCS Data
This prompt is displayed only when you are in the DBCS system. It
specifies N (No) or Y (Yes) in this prompt to specify whether DBCS
(Double-Byte Character Set) data is used in the text data of PFD
definitions in the PFD definition file or not.
Chapter 11. Work with PFD Definition Files 201