Filter
Top Products
Field Name Description
Parameters Displayed parameters depend on the element type. These parameters
are needed for each element:
Text
The font value is displayed. For SBCS systems, the value is
displayed as "FONT=F", where F is 0 for the default font or 1 - 8 for
a specified font local ID. For text elements on DBCS systems, the
value is displayed as "SBCS FONT=F" if the element does not have
a DBCS font specified, and "SBCS FONT=F DBCS FONT=F" if
the element does have a DBCS font specified. The text data is
displayed after the font value. There are three spaces between the
font value and the first text character.
Line
End position is displayed.
Box
End position is displayed. If text is specified with the box, the font
value and the text are also displayed after the end position.
Bar code
| If HRI is to be printed, the HRI font value is displayed. The bar
code data follows the font value. There are three spaces between
the font value and the bar code data.
Page segment
Page segment name is displayed.
Graphics
End position is displayed.
Record layout
None.
No input is allowed in this field. You can display other parameters
when you change the element on the Change Detail display.
Create or Change the Element
You can not enter or change parameters directly on the list. However, you can
define new elements or change existing elements through the create or change
element operation easily and efficiently.
Create
To define a new element in the list view, do the following.
Step 1. Press one of the following function keys depending on the type of
element regardless of the cursor position.
Text F6
Line F9
Box F10
Bar Code F11
Graphics F13 then F6
Page segment F13 then F9
Record layout F13 then F11
Chapter 13. Design Operation 285