Filter
Top Products
23 Work with Page Segments
Converting a PC Document to a Page Segment
Note: To perform the following task, you need a PC document, in a folder, that
contains IMDS format or IOCA function set 10 image data. To create a PC
document, do the following:
1. If necessary, ask the system administrator to add a directory entry (ADDDIRE)
for your user ID.
2. Create a folder using the Create Folder (CRTFLR) command.
| 3. On a personal computer that is connected to the AS/400 and has Client Access
| for AS/400 shared folder function running on it, create an IMDS format or an
IOCA function set 10 image data file with an image handling program.
4. On the personal computer, copy the file to a document in a shared folder.
In the following examples, the following names are used:
IOCAFLR for the folder name
LOGO for the PC document name
MYLIB for the library name
LOGO for the page segment name
You may change these names to your own names.
Example Actions:
1. Type 21 on the Selection or command line in the display.
2. Press the Enter key.
The Convert to Page Segment display appears:
Convert to Page Segment
Type choices, press Enter.
Page segment . . . . . . . . LOGO Name
Library . . . . . . . . . MYLIB Name, ᑍCURLIB
Source object type . . . . . 1 1=PC document, 2=File
Bottom
F3=Exit F5=Refresh F12=Cancel
You are required to enter the qualified name of the page segment to be created
and the object type of the input data.
308 AFP Utilities for AS/400 User’s Guide