Filter
Top Products
STRPFU──────────────────────────────────────────────────────────────
Required
─────────────────────────────────────────────────────────────────────────
Optional
┌─ᑍPRV─────────────────────────────────────────────┐
──PFDFILE─────┤ ┌─ᑍLIBL/──────────┐ ├────
└──┼──ᑍCURLIB/────────┼──PFD─definition─file─name───┘
└──library─name/───┘
┌─ᑍPRV─────────────────┐
──PFDMBR──────┼─ᑍSELECT──────────────┼────────────────────────────────
└──PFD─definition─name──┘
┌─ᑍBLANK─┐
──OPTION──┼──1──────┼───────────────────────────────────────────────────
├─2──────┤
├──3──────┤
├──4──────┤
├──6──────┤
├──7──────┤
└──9──────┘
┌────────────────────────────────────┐
│ Job: I Pgm: I REXX: I Exec │
└────────────────────────────────────┘
Figure 38. The Command Syntax for STRPFU Command
The following describes the parameters for STRPFU command.
PFD file (PFDFILE)
Specifies the PFD definition file and library that contain the PFD
definition to be worked with.
The possible values are:
*PRV
Specifies that the Print Format Utility is to use the name of the PFD
definition file and library used in your last Print Format Utility
session. If you specify *PRV for the PFDFILE parameter, it is not
necessary to specify a library.
PFD-definition-file-name
Specify the name of an existing PFD definition file to be used. If
you specify the PFD-definition-file-name and a library name, Print
Format Utility searches the specified library for the PFD definition
file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL
The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no
library is specified as the current library for the job, library QGPL
is used.
358 AFP Utilities for AS/400 User’s Guide