Filter
Top Products
If the size of the graphics is small, the text in the graphics is not printed
correctly. The printed characters overlap each other or are only partially printed.
3935 Printer
Double Byte Character Sets are not supported.
Enlarged or reduced characters are not supported.
Vertical format is not supported if its font is type 1 (specified with a font and a
character identifier).
Only *DEFAULT and 8=Black are allowed for the
Color
prompt.
| You can print graphic elements only with *CONTENT print fidelity, because
| graphics (GDF) have color orders that are not supported.
For this printer type CODE128 bar codes must be specified with check digits.
4234 Printer
Double Byte Character Sets are not supported.
Font type 2 (specified with a coded font) and font type 3 (specified with a code
page and a font character set) are not supported.
You may specify fonts of font type 2 and 3. Printing may occur because the
system substitutes the fonts with fonts of font type 1 if the print fidelity is
*CONTENT and a corresponding font exists.
IOCA image is not supported.
Vertical format is not supported.
When the sum of the degree of rotation specified on either the Define Overlay
Specifications display or the Define PFD Specifications display, and the degree
of rotation specified on the Define Text Detail display, the Define Box Detail
display, or the Define Graphics Detail display is not 0 or 360, the degree of
rotation is not supported.
When the sum of the degree of rotation specified on either the Define Overlay
Specifications display or the Define PFD Specifications display, and the degree
of rotation specified on the Define Bar Code Detail display is not 180, 270, 540,
nor 630, the degree of rotation is not supported.
A bar code type POSTNET is not supported.
Only *DEFAULT and 8=Black are allowed for the
Color
prompt.
If you specify a value other than *DEFAULT and 8=Black for the
Color
prompt,
the printout is printed in black or error occurs.
| You can print graphic elements only with *CONTENT print fidelity, because
| graphics (GDF) have color orders that are not supported.
If you specify too small a value for the
Character size
prompt on the Define
Text Detail display or the Change Text Detail display, the text is not printed
correctly. The printed characters overlap each other or are only partially
printed.
If the size of the graphics is small, the text in the graphics is not printed
correctly. The printed characters overlap each other or are only partially
printed.
418 AFP Utilities for AS/400 User’s Guide