IBM AS/400 Photo Scanner User Manual


 
The length of data can be 12, 14, or 17 characters. The first 2 digits are two
flag digits. The next 10 digits are the article-identification digits. The first flag
digit is not bar-coded. The second flag digit that the article-identification digit
and a check digit generated by the printer are bar-coded.
If the length of data is 14 characters, the last 2 digits are interpreted as the
EAN two-digit add-on. If the length of data is 17 characters, the last 5 digits
are interpreted as the EAN five-digit add-on.
2-of-5 industrial
The following characters are valid.
123456789
The length of data can be up to 100 characters.
2-of-5 matrix
The following characters are valid.
123456789
The length of data can be up to 100 characters.
Interleaved 2-of-5 (MHI/AIM USD-1)
The following characters are valid.
123456789
The length of data can be up to 100 characters.
Codabar (MHI/AIM USD-4)
The following characters are valid.
123456789
-$:/.+ABCD
The length of data can be up to 100 characters. The characters A, B, C, and D
shall be used only as start and stop delimiters.
CODE128
All ASCII 128 character set values are valid, and the data length is variable.
POSTNET
The following characters are valid.
123456789
You can specify the following POSTNET type:
1 ZIP Code (The maximum length is 5 digits)
2 ZIP+4 (9 digits)
3 Advanced bar codes (11 digits)
4 Variable length data (up to 100 digits)
| RM4SCC
| The following characters are valid.
| 123456789
| ABCDEFGHIJKLMNOPQRSTUVWXYZ
| The length of data can be from 5 to 12 characters.
Chapter 13. Design Operation 261