Filter
Top Products
Source overlay (MBR)
Specifies the name of the source overlay to be worked with or created.
The default value for this parameter depends on whether or not you
specify the FILE parameter.
The possible values are:
*SELECT
This is the default value if you specify the FILE parameter. If you
choose *SELECT, you will get the lists of all source overlays in the
specified source overlay file and library. Select one or more source
overlays to work with on the display.
*PRV
This is the default value if you do not specify the FILE parameter.
*PRV is the name of the previous source overlay that was used.
source-overlay-name
Specify the name of the source overlay you want to work with.
Option (OPTION)
Specifies the function to perform on the selected source overlay.
The possible values are:
*BLANK or ' '
This is the default value if you do not specify a source overlay
name. *BLANK specifies no action.
1=Create
Type 1 to create a source overlay.
2=Change
This is the default value if you specify a source overlay name.
Type 2 to change a source overlay.
3=Copy
Type 3 to copy a source overlay.
4=Delete
Type 4 to delete a source overlay.
6=Print
Type 6 to print a source overlay.
7=Rename
Type 7 to rename a source overlay.
9=Create overlay
Type 9 to create an overlay from a source overlay.
STRPFU (Start Print Format Utility) Command
This command allows you to perform an option of Print Format Utility directly
without viewing the Work with PFD Definitions display. Figure 38 on page 358
shows the command syntax for STRPFU command.
Chapter 21. AFP Utilities for AS/400 Commands 357