Filter
Top Products
Press the Enter, F3, or F12 key to return to the Design Overlay display, or press
the F4 key to specify more parameters.
In the Define Text Detail display, you can specify more parameters for a text
element if you need to define it more precisely. For example, you can specify the
character font and color for the text element. The Overlay Utility and the Print
Format Utility check the specified values to make sure the element is completely
contained in the overlay, the record layout, or the page layout by referring to its
page size, which was previously defined in the overlay specifications or the PFD
specifications.
Change Text Detail
Mark: ᑍT1 Measurement method: Row/Column
Type choices, press Enter.
Position:
Across . . . . . . . . . . 32 1-999
Down . . . . . . . . . . . 2 1-999
Text data . . . . . . . . . AS/4 Stationery Co., Ltd.
Element . . . . . . . . . . Name
Format . . . . . . . . . . . 1 1=Horizontal, 2=Vertical
Degree of rotation . . . . . , 9, 18, 27
Color . . . . . . . . . . . ᑍDEFAULT ᑍDEFAULT, 1=Blue, 2=Red
3=Magenta, 4=Green, 5=Cyan
6=Yellow, 7=Brown, 8=Black
Underline . . . . . . . . . N Y=Yes, N=No
Overstrike . . . . . . . . . Character
Font . . . . . . . . . . . . ᑍDEFAULT ᑍDEFAULT, 1-8, F4 for list
More...
F3=Exit F4=Prompt F5=Refresh F6=Change measurement method
F1=Edit numeric F12=Cancel
Field Name Description
Measurement
method
This field shows the measurement method used to specify the position.
You may change this field by pressing the F6 key.
Position The position parameter consists of across and down values. These
values specify the horizontal and vertical position of the element being
defined.
Text data| You can enter the text data in this field or update the previously entered
| text data that is displayed in this field. You can enter up to 58
| characters. If you need to enter more than 58 characters of text data,
press F4 (Detail) to enter the Define Text Detail display.
If the previously defined text data is longer than 58 characters, three
periods (...) will be displayed at the end of this field. It means that more
text data exists. When executing on a DBCS system, DBCS data can
be entered in this field.
Chapter 13. Design Operation 235