IBM AS/400 Photo Scanner User Manual


 
Task How to Do the Task
Specify a font with a font and character
identifier
1. Enter 2.
2. Enter 1.
Specify a font with a coded font 1. Enter 2.
2. Enter 2.
Specify a font with a code page and a font
character set
1. Enter 2.
2. Enter 3.
Return a font to the initial font 1. Enter 9.
Task Related to Printout Specifications
Note: The following description assumes that you are on the Define Printout
Specifications display.
Task How to Do the Task
Print more than one copy Specify the number in the
Copies
prompt.
Print even though there are some errors Specify *CONTENT in the
Print fidelity
prompt.
Print as good of quality as possible Specify *NLQ in the
Print quality
prompt.
Print as fast as possible Specify *DRAFT in the
Print quality
prompt.
Print on both sides of the paper Specify Y in the
Duplex
prompt.
Inform the operator to change the form
when it is printed
Specify a form name in the
Form type
prompt.
Use the paper in an alternate drawer Specify a number in the range of 2-255,
*E1, or *CUT in the
Source drawer
prompt.
Print an overlay with the printout Specify the overlay name in the
Front side
overlay
prompt.
Print a different overlay on the other side of
paper with the printout
Specify the overlay name in the
Back side
overlay
prompt.
Task Related to Mapping Object
Note: The following description assumes that you are on the Specify Mapping
Object Name display.
Task How to Do the Task
Specify mapping object name 1. Select the object type you want to
specify the mapping.
2. Specify the pair of the database field
value and the object name to which the
field value should be mapped.
Task Related to Break Fields
Note: The following description assumes that you are on the Specify Break Fields
display.
Task How to Do the Task
Specify field in the list as a break field. Enter 1 on the
Opt
field.
Cancel a break field in the list. Clear the
Opt
field with a blank.
456 AFP Utilities for AS/400 User’s Guide