Filter
Top Products
Field Name Description
Print fidelity Specify the degree of exactness required when printing the overlay.
The possible predefined values are:
*CONTENT Prints the overlay using all available exception handling.
*ABSOLUTE The job is printed only if the overlay can be printed
exactly as specified by the data stream and external
controls.
7=Rename Overlay
To rename an overlay, do the following on the Work with Overlays display on page
333.
1. Type 7 in the
Opt
column beside the overlay which you want to rename.
2. Press Enter.
The CL command RNMOBJ is called.
8=Display Overlay Description
To display an overlay description, do the following on the Work with Overlays
display on page 333.
1. Type 8 in the
Opt
column beside the overlay for which you want to display the
description.
2. Press Enter.
The CL command DSPOBJD is called.
9=Convert Overlay to Physical File Member
To convert an overlay to a physical file member, do the following on the Work with
Overlays display on page 333.
Note: Before you use an overlay in the target system, you have to verify that the
necessary resources to use that overlay (for example, font and page
segment) are on the target system. Only transferring an overlay may be
insufficient. You also have to check the version and the supported
structured fields of the target system's Print Services Facility*.
An overlay which can be used on the AS/400 system cannot necessarily be
used on the target system.
1. Type 9 in the
Opt
column beside the name of the overlay which you want to
convert to a physical file member.
2. Press Enter.
The following display appears:
338 AFP Utilities for AS/400 User’s Guide