IBM AS/400 Photo Scanner User Manual


 
*SAME
Specifies the same value used for this parameter when you
previously created a page segment of the same name. If this is the
first page segment, the default value is *LIBCRTAUT.
*LIBCRTAUT
The system determines the authority for the page segment by using
the value specified for the Create authority prompt (CRTAUT
parameter) on the Create Library command (CRTLIB) for the library
containing the page segment to be created. If the value specified
on the Create authority prompt (CRTAUT parameter) is changed,
the new value will not affect this page segment.
*CHANGE
Change authority allows the user to perform all operations on the
page segment except those limited to the owner or controlled by
object existence authority and object management authority. The
user can change the page segment and perform basic functions on
the page segment. Change authority provides object operational
authority and all data authority.
*ALL
All authority allows the user to perform all operations on the page
segment except those limited to the owner or controlled by
authorization list management authority. The user can control the
page segment's existence, specify the security for the page
segment, change the page segment, and perform basic functions on
the page segment. The user cannot transfer ownership of the page
segment.
*USE
Use authority allows the user to perform basic operations on the
page segment, such as read the page segment. The user is
prevented from changing the page segment. Use authority provides
object operational authority, read authority, and execute authority.
*EXCLUDE
Exclude authority prevents the user from accessing the page
segment.
authorization-list-name
Specify the name of an authorization list. Users included on the
authorization list are granted authority to the page segment as
specified by the list. The authorization list must exist when the page
segment is created.
Text 'description' (TEXT)
Specifies text that briefly describes the page segment to be created.
The possible values are:
*SAME
Specifies the text used when you previously created a page
segment of the same name.
*BLANK
Specifies the text is blank.
Chapter 21. AFP Utilities for AS/400 Commands 371