IBM AS/400 Photo Scanner User Manual


  Open as PDF
of 516
 
Task How to Do the Task
Define a line
element
1. Position the cursor in the image area.
2. Press the F9 key.
3. Position the cursor at another position in the image area.
4. Press the F9 key.
Define a box
element
1. Position the cursor in the image area.
2. Press the F10 key.
3. Position the cursor at another position in the image area.
4. Press the F10 key.
Define a bar
code element
1. Position the cursor in the image area.
2. Press the F11 key.
Define a
graphics
element
1. Position the cursor in the image area.
2. Press the F13 key.
3. Press the F6 key.
4. Position the cursor at another corner in the image area.
5. Press the F6 key.
Define a page
segment
element
1. Position the cursor in the image area.
2. Press the F13 key.
3. Press the F9 key.
Define a record
layout element
1. Position the cursor in the image area.
2. Press the F13 key.
3. Press the F11 key.
Handling Existing Elements
Task How to Do the Task
Change an
element
1. Position the cursor to the element mark
2. Press the F14 key.
Copy an
element
1. Position the cursor to the element mark
2. Press the F21 key.
3. Position the cursor to a new position.
4. Press the F6 key.
Move an
element
1. Position the cursor to the element mark
2. Press the F21 key.
3. Position the cursor to a new position.
4. Press the F9 key.
Remove an
element
1. Position the cursor to the element mark
2. Press the F21 key.
3. Press the F10 key.
Copy a block of
elements
1. Position the cursor at a corner of the block.
2. Press the F22 key.
3. Position the cursor at the diagonal corner of the block.
4. Press the F22 key.
5. Position the cursor to a new position.
6. Press the F6 key.
Move a block of
elements
1. Position the cursor at a corner of the block.
2. Press the F22 key.
3. Position the cursor at the diagonal corner of the block.
4. Press the F22 key.
5. Position the cursor to a new position.
6. Press the F9 key.
Remove a block
of elements
1. Position the cursor at a corner of the block.
2. Press the F22 key.
3. Position the cursor at the diagonal corner of the block.
4. Press the F22 key.
5. Press the F10 key.
Appendix E. How to Do a Task 449
 previous next