Filter
Top Products
Example Actions:
1. Type LOGO for the
Page segment
prompt.
2. Type MYLIB for the
Library
prompt.
3. Type 1 for the
Source object type
prompt.
4. Press the Enter key.
Remaining parameters appear according to the specified object type of the input
data.
Convert to Page Segment
Type choices, press Enter.
Page segment . . . . . . . . LOGO Name
Library . . . . . . . . . MYLIB Name, ᑍCURLIB
Source object type . . . . . 1 1=PC document, 2=File
From folder . . . . . . . . IOCAFLR
From PC document . . . . . . LOGO Name
Change image size . . . . . N Y=Yes, N=No
Degree of rotation . . . . . , 9, 18, 27
Authority . . . . . . . . . ᑍLIBCRTAUT Name, ᑍLIBCRTAUT, ᑍCHANGE
ᑍALL, ᑍUSE, ᑍEXCLUDE
Text 'description' . . . . . Logo
Replace . . . . . . . . . . Y Y=Yes, N=No
Bottom
F3=Exit F5=Refresh F12=Cancel
You are required to enter the folder name and the PC document name. You may
also enter other parameters; for example, type Y for the
Change image size
prompt
if you want to increase or decrease the image size or type 18 for the
Degree of
rotation
prompt if you want to print the image upside down.
Example Actions:
1. Type IOCAFLR for the
From folder
prompt.
2. Type LOGO for the
From PC document
prompt.
3. Type Logo for the
Text 'description'
prompt.
4. Press the Enter key.
The IBM Advanced Function Printing Utilities for AS/400 menu appears with a
completion message. Page segment LOGO has been created in library MYLIB.
Printing an Overlay
Note: To perform the following task, you need an overlay object. To create an
overlay object, do the tasks described in Chapter 5, “Work with Source Overlays”
on page 59.
In the following examples, the following names are used:
*LIBL for the library name
STATIONE for the overlay name
Chapter 16. Getting Started with the Resource Management Utility 309