IBM AS/400 Photo Scanner User Manual


 
C Copies the element.
The key entry area appears at the lower part of the display,
and you can specify the position in the
Across
prompt and the
Down
prompt of the new element.
The newly created element is added after the last line of the
list and the display scrolls to show the new element. The
original element is not affected by the copy.
M Moves the element.
The key entry area appears at the lower part of the display,
and you can specify the position in the
Across
prompt and the
Down
prompt to specify the new position of the element.
R Removes the element.
The removed mark (*) appears in the
ID
column. The remove
operation does not affect the removed element or other
remaining elements. In the screen view, the removed
elements do not appear on the image area, and you cannot
change them. However, in the list view, they appear in the
image area with an asterisk in the
ID
column. Removed
elements are not printed.
S Restores the element.
The removed mark '*', shown in the
ID
column, disappears. In
the screen view, the restored elements appear in the image
area and they can be changed.
Step 3. Press Enter. (This step is needed for copy and move operations only.)
The selected element is copied or moved.
Chapter 13. Design Operation 287