Filter
Top Products
4−23
4.32 General-Purpose Event Status Register
The general-purpose event status register contains status bits that are set when general events occur, and can be
programmed to generate general-purpose event signaling through GPE
. See Table 4−10 for a complete description
of the register contents.
Bit 7 6 5 4 3 2 1 0
Name General-purpose event status
Type RCU RCU R RCU RCU RCU RCU RCU
Default 0 0 0 0 0 0 0 0
Register: General-purpose event status
Offset: 88h
Type: Read/Clear/Update, Read-only
Default: 00h
Table 4−10. General-Purpose Event Status Register Description
BIT SIGNAL TYPE FUNCTION
7 ‡ PWR_STS RCU Power change status. This bit is set when software changes the V
CC
or V
PP
power state of either socket.
6 ‡ VPP12_STS RCU
12-V V
PP
request status. This bit is set when software has changed the requested V
PP
level to or from 12 V
for either socket.
5 RSVD R Reserved. This bit returns 0 when read. A write has no effect.
4 ‡ GP4_STS RCU
GPI4 status. This bit is set on a change in status of the MFUNC5 terminal input level if configured as a
general-purpose input, GPI4.
3 ‡ GP3_STS RCU
GPI3 status. This bit is set on a change in status of the MFUNC4 terminal input level if configured as a
general-purpose input, GPI3.
2 ‡ GP2_STS RCU
GPI2 status. This bit is set on a change in status of the MFUNC2 terminal input level if configured as a
general-purpose input, GPI2.
1 ‡ GP1_STS RCU
GPI1 status. This bit is set on a change in status of the MFUNC1 terminal input level if configured as a
general-purpose input, GPI1.
0 ‡ GP0_STS RCU
GPI0 status. This bit is set on a change in status of the MFUNC0 terminal input level if configured as a
general-purpose input, GPI0.
‡
This bit is cleared only by the assertion of GRST
.