Filter
Top Products
8−34
8.36 Asynchronous Request Filter Low Register
The asynchronous request filter low set/clear register enables asynchronous receive requests on a per-node basis,
and handles the lower node IDs. Other than filtering different node IDs, this register behaves identically to the
asynchronous request filter high register. See Table 8−28 for a complete description of the register contents.
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Name Asynchronous request filter low
Type RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name Asynchronous request filter low
Type RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC RSC
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Register: Asynchronous request filter low
Offset: 108h set register
10Ch clear register
Type: Read/Set/Clear
Default: 0000 0000h
Table 8−28. Asynchronous Request Filter Low Register Description
BIT FIELD NAME TYPE DESCRIPTION
31 asynReqResource31 RSC If bit 31 is set to 1 for local bus node number 31, asynchronous requests received by the controller
from that node are accepted.
30 asynReqResource30 RSC If bit 30 is set to 1 for local bus node number 30, asynchronous requests received by the controller
from that node are accepted.
29−2 asynReqResourcen RSC Bits 29 through 2 (asynReqResourcen, where n = 29, 28, 27, …, 2) follow the same pattern as
bits 31 and 30.
1 asynReqResource1 RSC If bit 1 is set to 1 for local bus node number 1, asynchronous requests received by the controller
from that node are accepted.
0 asynReqResource0 RSC If bit 0 is set to 1 for local bus node number 0, asynchronous requests received by the controller
from that node are accepted.