Texas Instruments PCI7621 Camera Accessories User Manual


 
8−24
8.25 Isochronous Receive Interrupt Event Register
The isochronous receive interrupt event set/clear register reflects the interrupt state of the isochronous receive
contexts. An interrupt is generated on behalf of an isochronous receive context if an INPUT_* command completes
and its interrupt bits are set to 1. Upon determining that the isochRx (bit 7) interrupt in the interrupt event register at
OHCI offset 80h/84h (see Section 8.21) has occurred, software can check this register to determine which context(s)
caused the interrupt. The interrupt bits are set to 1 by an asserting edge of the corresponding interrupt signal or by
writing a 1 in the corresponding bit in the set register. The only mechanism to clear a bit in this register is to write a
1 to the corresponding bit in the clear register. See Table 8−18 for a complete description of the register contents.
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Name Isochronous receive interrupt event
Type R R R R R R R R R R R R R R R R
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name Isochronous receive interrupt event
Type R R R R R R R R R R R R RSC RSC RSC RSC
Default 0 0 0 0 0 0 0 0 0 0 0 0 X X X X
Register: Isochronous receive interrupt event
Offset: A0h set register
A4h clear register [returns the contents of isochronous receive interrupt event register
bit-wise ANDed with the isochronous receive mask register when read]
Type: Read/Set/Clear, Read-only
Default: 0000 000Xh
Table 8−18. Isochronous Receive Interrupt Event Register Description
BIT FIELD NAME TYPE DESCRIPTION
31−4 RSVD R Reserved. Bits 31−4 return 0s when read.
3 isoRecv3 RSC Isochronous receive channel 3 caused the interrupt event register bit 7 (isochRx) interrupt.
2 isoRecv2 RSC Isochronous receive channel 2 caused the interrupt event register bit 7 (isochRx) interrupt.
1 isoRecv1 RSC Isochronous receive channel 1 caused the interrupt event register bit 7 (isochRx) interrupt.
0 isoRecv0 RSC Isochronous receive channel 0 caused the interrupt event register bit 7 (isochRx) interrupt.