Filter
Top Products
8−25
8.26 Isochronous Receive Interrupt Mask Register
The isochronous receive interrupt mask set/clear register enables the isochRx interrupt source on a per-channel
basis. Reads from either the set register or the clear register always return the contents of the isochronous receive
interrupt mask register. In all cases the enables for each interrupt event align with the isochronous receive interrupt
event register bits detailed in Table 8−18.
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Name Isochronous receive interrupt mask
Type R R R R R R R R R R R R R R R R
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name Isochronous receive interrupt mask
Type R R R R R R R R R R R R RSC RSC RSC RSC
Default 0 0 0 0 0 0 0 0 0 0 0 0 X X X X
Register: Isochronous receive interrupt mask
Offset: A8h set register
ACh clear register
Type: Read/Set/Clear, Read-only
Default: 0000 000Xh
8.27 Initial Bandwidth Available Register
The initial bandwidth available register value is loaded into the corresponding bus management CSR register on a
system (hardware) or software reset. See Table 8−19 for a complete description of the register contents.
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Name Initial bandwidth available
Type R R R R R R R R R R R R R R R R
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name Initial bandwidth available
Type R R R RW RW RW RW RW RW RW RW RW RW RW RW RW
Default 0 0 0 1 0 0 1 1 0 0 1 1 0 0 1 1
Register: Initial bandwidth available
Offset: B0h
Type: Read-only, Read/Write
Default: 0000 1333h
Table 8−19. Initial Bandwidth Available Register Description
BIT FIELD NAME TYPE DESCRIPTION
31−13 RSVD R Reserved. Bits 31−13 return 0s when read.
12−0 InitBWAvailable RW This field is reset to 1333h on a system (hardware) or software reset, and is not affected by a 1394
bus reset. The value of this field is loaded into the BANDWIDTH_AVAILABLE CSR register upon
a GRST, PRST, or a 1394 bus reset.