Filter
Top Products
Teledyne API - T100 UV Fluorescence SO2 Analyzer SETUP Menu
105
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2
EXIT
SETUP X. MACHINE ID: 100 ID
0 1 0 0 ENTR EXIT
Toggle to cycle
through the available
character set: 0-9
ENTR accepts the new
settings
EXIT ignores the new
settin
g
s
Figure 5-14: COMM – Machine ID
The ID can be any 4-digit number and can also be used to identify analyzers in any
number of ways (e.g. location numbers, company asset number, etc.)
5.7.2. INET (ETHERNET)
Use SETUP>COMM>INET to configure Ethernet communications, whether manually
or via DHCP. Please see Section 6.5 for configuration details.
5.7.3. COM1 AND COM2 (MODE, BAUD RATE AND TEST PORT)
Use the SETUP>COMM>COM1[COM2] menus to:
configure communication modes (Section 6.2.1)
view/set the baud rate (Section 6.2.2)
test the connections of the co
m ports (Section 6.2.3).
Configuring
COM1 or COM2 requires setting the DCE DTE switch on the rear panel.
Section 6.1 provides DCE DTE information.
06807C DCN6650