Filter
Top Products
Teledyne API - Models T100, 100E Series (05036F DCN6650) APPENDIX A - Version Specific Software Documentation
Rev 1.0.3 (T-Series)/G6 (E-Series)
05036 Rev D A-11
APPENDIX A-2: Setup Variables For Serial I/O
Table A-1: Setup Variables
SETUP VARIABLE
NUMERIC
UNITS
DEFAULT
VALUE
VALUE RANGE DESCRIPTION
Low Access Level Setup Variables (818 password)
DAS_HOLD_OFF Minutes 15 0.5–20 Duration of DAS hold off period.
TPC_ENABLE — ON OFF, ON
ON enables temperature and pressure
compensation; OFF disables it.
50 RCELL_SET ºC
Warnings:
45–55
30–70
Reaction cell temperature set point and
warning limits.
50 IZS_SET
1
ºC
Warnings:
45–55
30–70
IZS temperature set point and warning
limits.
DYN_ZERO — OFF OFF, ON
ON enables contact closure dynamic
zero; OFF disables it.
DYN_SPAN — OFF OFF, ON
ON enables contact closure dynamic
span; OFF disables it.
CONC_PRECISION — 3 AUTO,
0,
1,
2,
3,
4
Number of digits to display to the right
of the decimal point for concentrations
on the display. Enclose value in double
quotes (“) when setting from the RS-
232 interface.
REM_CAL_DURATION
17
Minutes 20 1–120
Duration of automatic calibration
initiated from TAI protocol.
CLOCK_ADJ Sec./Day 0 -60–60 Time-of-day clock speed adjustment.
SERVICE_CLEAR — OFF OFF
ON
ON resets the service interval
timer.
TIME_SINCE_SVC Hours 0 0–500000 Time since last service.
SVC_INTERVAL Hours 0 0–100000 Sets the interval between service
reminders.
Medium Access Level Setup Variables (929 password)
LANGUAGE_SELECT — ENGL ENGL,
SECD,
EXTN
Selects the language to use for the
user interface. Enclose value in double
quotes (“) when setting from the RS-
232 interface.
MAINT_TIMEOUT Hours 2 0.1–100
Time until automatically switching out
of software-controlled maintenance
mode.
CONV_TIME — 33 MS 33 MS,
66 MS,
133 MS,
266 MS,
533 MS,
1 SEC,
2 SEC
Conversion time for PMT and UV
detector channels. Enclose value in
double quotes (“) when setting from the
RS-232 interface.
06807C DCN6650