Filter
Top Products
SETUP Menu Teledyne API - T100 UV Fluorescence SO2 Analyzer
130
5.9.9. TEST CHANNEL OUTPUT
When activated, output channel A3 can be used in the standard configuration to report
one of the test functions viewable from the SAMPLE mode display.
To activate the A3 channel and select a test function, access the Signal I/O from the
DIAG Menu (refer to Figure 5-16), then press:
DIAG TCHN TEST CHANNEL: NONE
NEXT ENTR EXIT
DIAG TEST CHAN OUTPUT
PREV NEXT ENTR EXIT
Continue to press NEXT until …
DIAG TCHN TEST CHANNEL: PMT READING
PREV NEXT ENTR EXIT
Press PREV or NEXT
to move through the
list of available
parameters
(Table 6-9)
Press EXIT to
return to the
DIAG menu
Press ENTR to
select the displayed
parameter and to
activate the test
channel.
DIAG SIGNAL I / O
PREV NEXT ENTR EXIT
Figure 5-35: DIAG – Test Channel Output
06807C DCN6650