Filter
Top Products
Teledyne API - T100 UV Fluorescence SO2 Analyzer Troubleshooting & Service
277
QUESTION ANSWER
How do I program and use them?
How long does the sample pump last? The sample pump should last about one year and the pump diaphragms should to
be replaced annually or when necessary. Use the PRES test function displayed via
the front panel to see if the diaphragm needs replacement (refer to Section 12.1.2).
Do I need a strip chart recorder or
external data logger?
No, the T100 is equipped with a very powerful internal data acquisition system.
Section 0 describes the setup and operati
on in detail.
12.9. TECHNICAL ASSISTANCE
If this manual and its troubleshooting / repair sections do not solve your problems,
technical assistance may be obtained from:
Teledyne API, Technical Support ,
9480 Carroll Park Drive
San Diego, California 92121-5201USA
Toll-free Phone:
800-324-5190
Phone:
858-657-9800
Fax:
858-657-9816
Email:
api-customerservice@teledyne.com
Website:
http://www.teledyne-api.com/
Before you contact Teledyne API’ Technical Support, fill out the problem report form in
Appendix C, which is also available online for electronic submission at
http://www.teledyne-api.com/forms/
.
06807C DCN6650