Filter
Top Products
Teledyne API - T100 UV Fluorescence SO2 Analyzer A Primer on Electro-Static Discharge
325
If you are at the instrument rack, hold the bag in one hand while your wrist strap is
connected to a ground point.
If you are at an anti-ESD workbench, lay the container down on the conductive work
surface.
In either case wait several seconds.
7. Place the item in the container.
8. Seal the container. If using a bag, fold the end over and fasten it with anti-ESD tape.
Folding the open end over isolates the component(s) inside from the effects of static
fields.
Leaving the bag open or simply stapling it shut without folding it closed prevents the
bag from forming a complete protective envelope around the device.
IMPORTANT
If you do not already have an adequate supply of anti-ESD bags or
containers available, Teledyne API’s Technical Support department will
supply them. Follow the instructions listed above for working at the
instrument rack and workstation.
06807C DCN6650