Filter
Top Products
Teledyne API - T100 UV Fluorescence SO2 Analyzer Getting Started
57
Analyzer Analyzer Analyzer Last Analyzer
Female DB9
Male DB9
RS-232
COM2
RS-232
COM2
RS-232
COM2
RS-232
COM2
Host
RS-232 port
Ensure jumper is
installed between
JP2 pins 21
22
in last instrument
of multidrop chain.
Figure 3-15: RS-232-Multidrop PCA Host
/Analyzer Interconnect Diagram
RS-485 CONNECTION
As delivered from the factory, COM2 is configured for RS-232 communications. This
port can be reconfigured for operation as a non-isolated, half-duplex RS-485 port. Using
COM2 for RS-485 communication disables the USB port. To reconfigure this port for
RS-485 communication, please contact the factory.
3.3.2. PNEUMATIC CONNECTIONS
This section provides not only pneumatic connection information, but also important
information about the gases required for accurate calibration (Section 3.3.2.10); it also
illustrates the pneumatic la
youts for the analyzer in its basic configuration and with
options.
Before making the pneumatic connections, carefully note the following cautionary and
additional messages:
CAUTION
GENERAL SAFETY HAZARD
SULFUR DIOXIDE (SO
2
) IS A TOXIC GAS.
DO NOT vent calibration gas and sample gas into enclosed areas. Obtain
a Material Safety Data Sheet (MSDS) for this material. Read and
rigorously follow the safety guidelines described there.
06807C DCN6650