Filter
Top Products
Getting Started Teledyne API - T100 UV Fluorescence SO2 Analyzer
36
Figure 3-2: Display Screen and Touch Control
The front panel liquid crystal display screen includes touch control. Upon analyzer start-
up, the screen shows a splash screen and other initialization indicators before the main
display appears, similar to Figure 3-2 above (may or may not display a Fault alarm).
The LEDs on the display
screen indicate the Sample, Calibration and Fault states; also
on the screen is the gas concentration field (Conc), which displays real-time readouts for
the primary gas and for the secondary gas if installed. The display screen also shows
what mode the analyzer is currently in, as well as messages and data (Param). Along the
bottom of the screen is a row of touch control buttons; only those that are currently
applicable will have a label. Table 3-2 provides detailed information for each
com
ponent of the screen.
ATTENTION
COULD DAMAGE INSTRUMENT AND VOID WARRANTY
Do not use hard-surfaced instruments such as pens to touch the control
buttons.
06807C DCN6650